The Single Towel Warmer is equipped with a micro-computer heating temperature device, which is mounted over a hot protection system.

Loading Capacity: 23L

Rated Power: 200W
Voltage: 110V 50Hz/60Hz
Exterior Dimension: 18" x 11" x 14"
Interior Dimension: 14 1/2" x 7 1/2" x 9 1/2"

Max. Temperature: 100°F - 150°F


  • Towel Warmer
  • Power Cord
  • Removal Rack
  • Water Deposit Box


  1. Pre-heat unit 10 minutes prior to use.
  2. Set the Single Towel Warmer on a flat stable surface.
  3. Make sure power button is off before plug into the power outlet.
  4. Make sure the water deposit box is correctly in place beneath the cabinet.
  5. Depending on the job being done, you can choose if you need to utilize the rack or not.
  6. Place the desired towels in the unit, before powering ON.
  7. Make sure the Cabinet Door is securely closed.
  8. Power ON the cabinet.
  9. When the temperature has reached the appropriate temperature, the Cabinet will turn into a temperature keeping state.

Cleaning and Storing  

  1. Disconnect from power when not in use or for cleaning.
  2. Do not wash the electrical part, recommend to just wipe down.
  3. Do not use abrasive cleaning supplies (i.e. scourers, acetone, alcohol, etc.)
  4. Rag dry the cabinet after every use to avoid rust or mold.